Craftsweld Dockbuilders Diving Helmet & Air Control

This is a vintage USN Mark V diving helmet air control valve. It is made of solid brass and was the first configuration used during the first half of the 20th century. In the 1916 US Navy diving manua

This is a vintage USN Mark V diving helmet air control valve. It is made of solid brass and was the first configuration used during the first half of the 20th century. In the 1916 US Navy diving manua

This is a vintage USN Mark V diving helmet air control valve. NEW OLD STOCK in its original WWII box. The valve is clearly stamped A. Schrader’s Son. This valve is new old stock never used. Note the

Nice example of a air control valve. This piece of equipment was used in conjunction with the US Navy Mark V diving helmet. The air control valve was attached to the whip, which attached to the air fi

Like new with original cardboard thread protectors is this Morse Diving Equipment air control valve. This piece of equipment was used with the US Navy Mark V diving helmet. It attached to the bastard

Original used Republic Rubber Co whip. This 3-foot-long rubber hose with female connections went from the helmet to the air control valve. Good example for display purposes only. Dated 1958. All items

Nice original air control valve made by Schrader. This is the type of valve used with the Mark V diving helmet. This piece does have the Schrader name stamped on it as well as a US Navy inspection sta

Excellent condition Mark V divers whip. This air supply house connects to the air fitting on a Mark V helmet and also to the air control valve. This whip was made by Republic Rubber during October 197

Draeger 1st stage regulator with pressure gauge for the DM200 and DM220 diving helmet systems. This would attached to the tank HP supply and to the 2nd stage air control valve. Appears to be in excell

Excellent new old stock air control valve made by Morse Diving Equipment in Boston. Valve is clearly stamped with company information. This valve is the type used in conjunction with the Mark V diving

American. 1920s. Cast iron and brass. This heavy pump has two reciprocating cylinders mounted astride a support with pivoting rocker arms. The steel handle used at the top of the rocker is pushed back

This is a length of vintage Mark V divers rubber air line hose. This line was made in 1979 and appears to be in good condition, but is being sold for display purposes only. The brass fittings are in g

This vintage brass cap would be threaded on to the Mark V diving helmet air fitting or the end of the non-return valve. Excellent condition. All items will be shipped with a signature required upon de

Sold brass vintage Morse exhaust control with four point star wheel and head/chin button. Excellent overall condition with functioning spring and easily turning star wheel. Signs of wear on the wheel.

Excellent grouping of WWII USN Mark V related diving equipment. The first piece is a Morse Diving Equipment Air Control valve. There is a small section of hose still attached as well as a brass swivel

Interesting piece of a English diving & rescue technology widely used around the world. This is an authentic vintage Siebe Gorman air pump. The pump was operated via a handle or by pushing the peddle

Very nice vintage divers whip. This section of hose connected the Mark V helmet to the air control valve. This whip was made by Republic Rubber during August of 1966. Excellent example for display pur

This lot consists of a US Navy Mark V diving helmet T wrench and air fitting cap. The wrench is used for the removal and installation of the 12 wing nuts on the outside of the breastplate. This exampl

This helmet was made by the Craftsweld Equipment Company. When this helmet was made the Craftsweld name was owned by the A. Schrader Diving Equipment Company located in Bowie, Maryland. This company w

This is an original grouping of used diving equipment parts. The parts include an air control valve stamped Morse Diving Equipment, brass clip, two complete dry suit clamps and two incomplete clamps,

Fantastic looking four-light twelve bolt copper and brass diving helmet! This beautiful piece was made by Craftsweld when located in Bowie, MD. The helmet appears to have never been put in the water a

This is an original grouping of used diving equipment parts. The parts include an air control valve with a US Navy inspection stamp, an air hose filter housing stamped Morse Diving Equipment, air hose

This is an original grouping of used diving equipment parts. The parts include an air control valve stamped Schrader USA, an air line filter housing stamped Morse Diving Equipment, six dry suit clamps

This is an original Diving Equipment & Supply Company Air Hat or Pot Hat diving helmet neck ring. Brass ring is in excellent condition, neoprene material is original and adequate for display purposes.