Cast iron Railroad Crossing embossed sign

Heavy 2 piece cast iron sign with chipping to original paint but have a great look! Both are marked WRR & Co. Are unassembled and measure 9 in x 47 in.

A two-sided cast iron sign for a railroad crossing. Side one shows separately applied "6" over "TRACKS" in black-painted lettering on a soiled white field with black border. Back of sign is embossed "

A cast iron sign mounted on a 4" black painted PVC pipe, "Stop Listen Look" embossed on round sign. Gloss black field paint with gloss white lettering and borders. Mounted on top is an electric bell m

This substantial cast iron sign is in the classic "X" shape and reads "Railroad Crossing". It is heavily weathered and what remains of the original black and white coating is cracked and peeling. The

Massive railroad issued vintage cast iron railroad crossing sign. Six foot long. Normal use and wear, see photos. Great addition to that train lovers ranch or property. Call for shipping related quest

Canadian. 1920s. Cast iron. Each panel bears a casting mark of "20896-82XA" on rear. Features two panels that bolt together through the center. Original surface exhibits scattered minor to moderate lo

A large cast iron railroad crossing sign in two assembled pieces. Ht: 47.25" Wd: 47.25"

An early cast iron railroad crossing sign with a 10 mph restriction. The reverse has info and "$10 fine" and other casting marks from Lebanon, New Hampshire. This early style crossing sign is not comm

Heavy 1-sided sign with some pitting and a small chip on right side, does have a signicant break on pole mount collar on back. 24" dia.

Cast iron w/ green paint "Railroad Crossing Stop Look and Listen" sign 19"x53" Condition: Good Temp No 3141

Cast Iron Railroad Crossing Sign. Stop Look and Listen. Approx. 6"H x 15"H. Photos Are Considered Part Of The Description And Condition.

Pair of matching cast iron railroad crossing signs (marked with an "X" designation and signed illegibly on top front, possibly W. 1777) - each approximately 16"H x 10"W with traces of old black and wh

Three matching cast iron railroad crossings signs (marked with an "X" designation and signed US on reverse) - each 18"H x 12"W and in old black, white, and gray paint, 19th century. All good condition

A single-sided vintage oval cast iron railroad crossing sign. "STOP LOOK LISTEN" in black-painted lettering on a faded and deteriorated white field. There are two mounting holes in the face for mounti

A cast iron railroad Crossing sign in two pieces. The two pieces measure 48" by 9". Both have a casting number on one side. You'll need to supply your own nuts & bolts. I can lift each one but not hap

Cast iron railroad "CROSSING" sign, measures 48" x 9". CONDITION: Fair, repainted.

Wow! This is an awesome two piece railroad crossing cast iron sign from the Western Maryland railroad. This sign was cast in two pieces, with the top section nesting / bolting to the lower two thirds

Western Railroad Supply Cast Iron Railroad Crossing Crossbucks Each sign measures 47 1/4" x 9". Cast with WRSS CO. and 3320-1. Both signs retain original paint. Some light rust at one edge of both sig

A cast iron "crossbuck sign that is currently disassembled. It has 2 pieces that you bolt together. Both pieces have RAILROAD and then CROSSING on the reverse side. You get both pieces and you'll have

An old cast iron sign "Railroad Crossing Stop Look and Listen." Sign is a large oval casting measuring 48" by 18 - 1/2". Sign is heavily rusted and significantly pitted both front and back. Rear of si

A very heavy cast iron sign that has "Railroad Crossing Stop Look And Listen". It measures about 56" by 19". At some point it was painted green and the "G" was painted white on top of the green. What

Delaware and Hudson Company cast iron sign measuring 36" x 32 5/8" designed for mounting on a square post. The sign indicates a private crossing along the Delaware and Hudson route. Sign has been repa

CAST-IRON "RAILROAD CROSSING / STOP / LOOK AND LISTEN" RAILROAD SIGN, oval form, repaint of white paint with raised black lettering, reverse with mounting bracket, approximately 90 lbs. each piece. Fi

Pole mounted cast iron sign measuring 32" x 15 1/2" Includes pole mounting hardware. Sign shows some mild paint wear and surface rust, but no notable condition issues to the sign itself.